|
The Optima U 3.7 battery may be shipped with a height adapter installed. It may be needed in one of 2 ways for installation. 1. In vehicles with a top holddown where more height is required, it should be used in its original position. Dimension changing Width: 172mm to 178m Height with bottom adapter: 197mm to 225mm Height with lid adapter: 197 mm to 204mm In some installations (replacing a group 65 battery) the bottom holddown of the battery must be made wider. For these installations, remove the adapter and detach the two strip adapters which are located inside. Snap these strips into the openings on either side of the battery base and discard the remainder.If the adapter is not needed for installation, it may be discarded. Dimension changing
Width: 182 mm to 183 mm
Height: 197 mm to 199 mm Optima Types 3.7 The wing adapters are attached to the ends of the battery to provide a hold down area for DIN H5 applications. Attach the wing adapters by snapping them into the openings on either end of the battery. Dimension changing Length: 228mm to 248mm OPTIMA RT U 4.2 The wing adapters available for the Optima 34/78 may be needed for some applications. Attach these wing adapters by snapping into the openings on either side of the battery price. Dimension changing 172mm to 183mm OPTIMA TYPE 4.2 Two adapters for a 19mm DIN hold down. Attach on both sides of the battery base to a width of 175mm. Dimension changing Width: 172mm to 175mm
 |
